Diploma in Construction Engineering Technology — study plan
University of Doha for Science and Technology College of Engineering and Technology
- Credit hours
- 69
- Levels
- 6
- Courses
- 30
- Degree
- diploma
The Diploma in Construction Engineering Technology study plan at University of Doha for Science and Technology is an accredited diploma programme spanning about 3 years (6 academic levels), requiring 69 credit hours across 30 courses of required and elective study. The table below lists the courses and their credit hours for each level.
Semester 1 14 credits
| Code | Course | Credits |
|---|---|---|
| AECH1201 | Basic Engineering Calculations | 1 |
| COMM1010 | English Communication I | 3 |
| MATH1010 | Algebra & Trigonometry | 3 |
| PHYS1000 | Applied Physics | 3 |
| PHYS1001 | Applied Physics (Lab) | 1 |
| EFFL1003 | Experiential Learning & Entrepreneurship | 3 |
Semester 2 18 credits
| Code | Course | Credits |
|---|---|---|
| AECE1200 | Introduction to Construction Engineering, Materials & Methods | 3 |
| AECE1230 | Mechanical & Electrical Systems in Construction | 3 |
| AECH1100 | Environmental Awareness & Ethics | 2 |
| AEEL1100 | Fundamentals of Electricity | 2 |
| AEEL1200 | Fundamentals of Electricity (Lab) | 1 |
| CHEM1010 | General Chemistry I | 3 |
| CHEM1011 | General Chemistry I (Lab) | 1 |
| MATH1020 | Pre-Calculus | 3 |
Semester 3 8 credits
| Code | Course | Credits |
|---|---|---|
| AECE1340 | Basic Construction Safety | 3 |
| AEMA1312 | Engineering Graphics | 3 |
| AEPC1203 | Basic Instrumentation | 2 |
Semester 4 12 credits
| Code | Course | Credits |
|---|---|---|
| AECE2100 | Construction Documents & Codes | 2 |
| AECE2110 | Principles of Engineering Economy | 2 |
| AECE2120 | Statics | 3 |
| AECE2130 | Principles of Geomatics | 3 |
| AECE2131 | Principles of Geomatics (Lab) | 1 |
| AECE2140 | Project Drawings & Graphics | 1 |
Semester 5 13 credits
| Code | Course | Credits |
|---|---|---|
| AECE2210 | Engineering Geology | 3 |
| AECE2220 | Construction Equipment & Machineries | 3 |
| AECE2230 | Strength of Construction Materials | 3 |
| AECE2231 | Strength of Construction Materials (Lab) | 1 |
| COMM1020 | English Communication II | 3 |
Semester 6 4 credits
| Code | Course | Credits |
|---|---|---|
| AECH2103 | Leadership & Management Principles | 2 |
| AETN2302 | Applied Programming I | 2 |
This plan is transcribed from the university's official source. Always confirm the plan approved for your own cohort before registering. Official source
Calculate your GPA for this major
Frequently asked questions about Diploma in Construction Engineering Technology
How many credit hours is Diploma in Construction Engineering Technology at University of Doha for Science and Technology?
Diploma in Construction Engineering Technology at University of Doha for Science and Technology requires completing 69 credit hours to graduate, spread across 30 courses.
How many years is Diploma in Construction Engineering Technology at University of Doha for Science and Technology?
The study plan for Diploma in Construction Engineering Technology spans about 3 years (6 levels/semesters) under the approved plan.
What degree does Diploma in Construction Engineering Technology award?
Diploma in Construction Engineering Technology at University of Doha for Science and Technology awards a Diploma degree after completing 69 credit hours.