Diploma in Automation and Control Engineering Technology — study plan
University of Doha for Science and Technology College of Engineering and Technology
- Credit hours
- 74
- Levels
- 6
- Courses
- 37
- Degree
- diploma
The Diploma in Automation and Control Engineering Technology study plan at University of Doha for Science and Technology is an accredited diploma programme spanning about 3 years (6 academic levels), requiring 74 credit hours across 37 courses of required and elective study. The table below lists the courses and their credit hours for each level.
Semester 1 21 credits
| Code | Course | Credits |
|---|---|---|
| AECH1201 | Basic Engineering Calculations | 1 |
| AEEL1101 | Fundamentals of Electricity I | 3 |
| AEEL1201 | Fundamentals of Electricity I (Lab) | 1 |
| COMM1010 | English Communication I | 3 |
| MATH1010 | Algebra & Trigonometry | 3 |
| PHYS1020 | General Physics | 3 |
| PHYS1021 | General Physics (Lab) | 1 |
| EFFL1001 | Effective Learning Elective | 3 |
| EFFL1002 | Applied & Experiential Learning Elective | 3 |
Semester 2 18 credits
| Code | Course | Credits |
|---|---|---|
| AEEL1102 | Fundamentals of Electricity II | 3 |
| AEEL1202 | Fundamentals of Electricity II (Lab) | 1 |
| AETN1102 | Network Fundamentals | 3 |
| AETN1202 | Network Fundamentals (Lab) | 1 |
| AETN1112 | Digital Electronics | 3 |
| AETN1212 | Digital Electronics (Lab) | 1 |
| COMM1020 | English Communication II | 3 |
| MATH1020 | Pre-Calculus | 3 |
Semester 3 7 credits
| Code | Course | Credits |
|---|---|---|
| AECH1100 | Environmental Awareness & Ethics | 2 |
| AEMA1312 | Engineering Graphics | 3 |
| AEPC1203 | Basic Instrumentation | 2 |
Semester 4 12 credits
| Code | Course | Credits |
|---|---|---|
| AEAC2101 | Industrial Processes, Measurement & Control | 3 |
| AEAC2201 | Industrial Processes, Measurement & Control (Lab) | 1 |
| AEEP2111 | Electrical Machines | 3 |
| AEEP2211 | Electrical Machines (Lab) | 1 |
| AETN2101 | Analog Electronics | 3 |
| AETN2201 | Analog Electronics (Lab) | 1 |
Semester 5 13 credits
| Code | Course | Credits |
|---|---|---|
| AEAC2102 | Industrial Instrumentation | 2 |
| AEAC2202 | Industrial Instrumentation Practices | 1 |
| AEEP2122 | Motor Controls & Drives | 3 |
| AEEP2222 | Motor Controls & Drives (Lab) | 1 |
| AEEP2301 | Applied Programming | 2 |
| CHEM1010 | General Chemistry I | 3 |
| CHEM1011 | General Chemistry Lab I | 1 |
Semester 6 6 credits
| Code | Course | Credits |
|---|---|---|
| AEAC2103 | Control Strategies | 2 |
| AEAC2203 | Control Strategies (Lab) | 1 |
| AEAC2113 | PLC Programming & Control | 2 |
| AEAC2213 | PLC Programming & Control (Lab) | 1 |
This plan is transcribed from the university's official source. Always confirm the plan approved for your own cohort before registering. Official source
Calculate your GPA for this major
Frequently asked questions about Diploma in Automation and Control Engineering Technology
How many credit hours is Diploma in Automation and Control Engineering Technology at University of Doha for Science and Technology?
Diploma in Automation and Control Engineering Technology at University of Doha for Science and Technology requires completing 74 credit hours to graduate, spread across 37 courses.
How many years is Diploma in Automation and Control Engineering Technology at University of Doha for Science and Technology?
The study plan for Diploma in Automation and Control Engineering Technology spans about 3 years (6 levels/semesters) under the approved plan.
What degree does Diploma in Automation and Control Engineering Technology award?
Diploma in Automation and Control Engineering Technology at University of Doha for Science and Technology awards a Diploma degree after completing 74 credit hours.