Master of Science in Gas and Process Engineering — study plan
- Credit hours
- 30
- Levels
- 6
- Courses
- 18
- Degree
- master
The Master of Science in Gas and Process Engineering study plan at Qatar University is an accredited master programme spanning about 3 years (6 academic levels), requiring 30 credit hours across 18 courses of required and elective study. The table below lists the courses and their credit hours for each level.
Year 1 - Fall 3 credits
| Code | Course | Credits |
|---|---|---|
| GENG 602 | Applied Research Methodology | 3 |
| GENG 606 | Graduate Seminar | 0 |
Year 1 - Spring 3 credits
| Code | Course | Credits |
|---|---|---|
| Elective Course in Concentration I Elective | 3 |
Year 2 - Fall 9 credits
| Code | Course | Credits |
|---|---|---|
| CHME 695 | Master Thesis | 3 |
| Elective Course II Elective | 3 | |
| Elective Course III Elective | 3 |
Year 2 - Spring 3 credits
| Code | Course | Credits |
|---|---|---|
| CHME 695 | Master Thesis | 3 |
Required Major Core Courses (12 CH) 12 credits
| Code | Course | Credits |
|---|---|---|
| CHME 668 | Downstream Gas Processing, Analysis, Utilization and Safety | 3 |
| CHME 669 | Technologies for Gas Produced Water Treatment | 3 |
| CHME 660 | Advanced Modeling, Control, and Optimization | 3 |
| CHME 666 | Advanced Application in Gas Processing | 3 |
Elective Courses Pool 21 credits
| Code | Course | Credits |
|---|---|---|
| CHME 661 | Catalysis Elective | 3 |
| CHME 662 | Advanced Biochemical Engineering Elective | 3 |
| CHME 663 | Advanced Corrosion Engineering Elective | 3 |
| CHME 664 | Chemical Engineering Process Intensification Elective | 3 |
| CHME 665 | Advanced Special Topics Elective | 3 |
| CHME 658 | Advanced Thermodynamics Elective | 3 |
| CHME 659 | Advanced Chemical Reaction Engineering and Reactor Design Elective | 3 |
This plan is transcribed from the university's official source. Always confirm the plan approved for your own cohort before registering. Official source
Calculate your GPA for this major
Frequently asked questions about Master of Science in Gas and Process Engineering
How many credit hours is Master of Science in Gas and Process Engineering at Qatar University?
Master of Science in Gas and Process Engineering at Qatar University requires completing 30 credit hours to graduate, spread across 18 courses.
How many years is Master of Science in Gas and Process Engineering at Qatar University?
The study plan for Master of Science in Gas and Process Engineering spans about 3 years (6 levels/semesters) under the approved plan.
What degree does Master of Science in Gas and Process Engineering award?
Master of Science in Gas and Process Engineering at Qatar University awards a Master's degree after completing 30 credit hours.